
Gardall B1311-G-C In-Floor Safe
Price: $1,106.25
- External Dimensions: 17.25"H x 12.88"W x 14.75"D
- Internal Dimensions: 13"H x 12.5"W x 13.25"D
- Cubic Inches: 1.25 cubic feet
- Weight: 117 lbs
B-rate floor safe: concealed in-concrete protection for valuables
For homeowners who want hidden, hard-to-remove storage, the Gardall B1311-G-C is a USA-made in-floor safe built with B-rate burglary construction. Set into a concrete floor and covered by a rug or floorboard, it secures cash, jewelry, and documents behind a Group II U.L.-listed combination lock or electronic push-button lock, a hard plate, and an independent relocking device.
The body measures 17.25 inches high, 12.88 inches wide, and 14.75 inches deep, with a 13 by 12.5 by 13.25-inch interior of roughly 1.25 cubic feet. At 117 pounds, it is sized to drop into a poured-concrete floor where the surrounding slab, not the safe's weight alone, anchors it against removal.
Engineering & Security
- B-rate burglary construction: Gardall builds the B1311-G-C to B-rate standards with a reinforced door frame on the bolt side to resist prying and forced entry.
- Five 3/4-inch active bolts: The bolt array combines with a full-length locking bar on the hinge side, so the door is held on both edges, not just one.
- Group II U.L.-listed lock: Choose a Group II combination dial or an electronic push-button lock, both backed by a hard plate between the lock and dial ring to deter drilling.
- Independent relocking device: A secondary relocker engages if the primary lock is attacked, keeping the bolts thrown during a punch or drill attempt.
Concealment & Installation
- In-concrete installation: Designed to be set in a concrete floor, where the slab itself resists removal and the safe stays out of sight under a rug or floorboard.
- Coil-spring door assist and dust cover: A coil spring eases opening and closing, and an included dust cover keeps debris out of the lock and interior between uses.
- Not fire-rated by design: This is a burglary-focused floor safe with no fire rating; pair it with a fire-rated unit if heat protection is a priority.
Ideal Buyer & Use Cases
The B1311-G-C suits homeowners and small businesses who want concealed, anchored storage for cash, jewelry, and documents rather than a visible standing safe. Its 17.25 by 12.88 by 14.75-inch body, 117-pound weight, and roughly 1.25 cubic feet of interior fit a single floor cavity discreetly.
If you need less depth, the smaller Gardall B1307-G-C or the compact G700-G-C are lower-priced floor-safe alternatives in the same series.
Fill Type
None
Made In
USA
Lock Type(s)
Mechanical, Electronic
Location
Floor
Total Body Thickness
0.25 inches
Total Door Thickness
0.5 inches
Total Steel in Body
0.25 gauge
Total Steel on Door
0.5 gauge
External Depth
14.75 inches
External Height
17.25 inches
External Width
12.88 inches
Weight
117 lbs
Internal Height
13 inches
Internal Width
12.5 inches
Internal Depth
13.25 inches
Cubic Inches
1.25 cubic feet
Fill Type
None
Made In
USA
Lock Type(s)
Mechanical, Electronic
Location
Floor
Total Body Thickness
0.25 inches
Total Door Thickness
0.5 inches
Total Steel in Body
0.25 gauge
Total Steel on Door
0.5 gauge
External Depth
14.75 inches
External Height
17.25 inches
External Width
12.88 inches
Weight
117 lbs
Internal Height
13 inches
Internal Width
12.5 inches
Internal Depth
13.25 inches
Cubic Inches
1.25 cubic feet










