Hayman S1200B Floor Safe Body Only

Patented rustproof in-floor body: the door-only Hayman replacement

Built for Hayman owners who already have a working floor-safe door, the Hayman S Series S1200B is the body-only component of the patented Polyethylene In-Floor Safe line and the smallest size in that family. The molded polyethylene body is rustproof and leak-resistant, ships with a carpeted interior and a steel cover plate, and is made in the USA. It carries no independent burglary or fire certification.

This is a compact in-floor unit. The body measures 15 in high by 15 in wide by 10.25 in deep on the outside, with an 11.5 in high by 14.5 in wide by 8 in deep carpeted interior and a clear door opening of 8-3/4 in by 7-3/8 in. It weighs roughly 24 lbs uncrated, light enough to set into a poured-concrete pocket before the slab cures.

Engineering & Security

• ✓Patented polyethylene body: The one-piece molded body is rustproof and leak-resistant, resisting the ground moisture and seepage that corrode steel floor safes set in concrete.
• ✓1/4-inch door collar: Bolted to the body on all four sides with specially hardened bolts, the collar anchors the separately purchased door to the buried housing.
• ✓1/2-inch welded door frame: Welded to the door collar, the frame provides the rigid steel seat your Hayman door closes against.
• ✓Not independently rated: This body carries no UL or ETL burglary or fire listing; protection depends on the matched Hayman door and proper concrete installation.

Concealment & Installation

• ✓Steel cover plate: A steel plate seats above the door so the unit finishes flush with surrounding concrete and hides under flooring or a rug.
• ✓Carpeted interior: The molded floor is carpeted to cushion stored valuables and reduce noise when items are placed or retrieved.
• ✓Door-only replacement: Confirm fit before ordering, since not every Hayman door mates to this polyethylene body; the dealer can verify your door model.

Ideal Buyer & Use Cases

The S1200B body suits a Hayman owner replacing a cracked or corroded in-floor housing while keeping an existing door, or a builder pouring a new concrete floor who will fit a Hayman door later. At 15 in by 15 in by 10.25 in outside, an 8 in deep carpeted interior, and about 24 lbs, it is the smallest body in the Polyethylene series.

If you need a complete safe rather than a bare body, the Hayman S1200B Polyethylene In-Floor Safe pairs this same housing with a finished door and lock as a ready-to-install unit.